Conditioning Shampoo Bar (Advanced)

Conditioning Shampoo Bar


The last couple of weeks we have focused on learning all about the hair as well as the best ingredients and formulas to use for different hair types. We’ve covered a huge amount, and if you would like a crash course in hair care, then we highly recommend that you read through all the  Hair Science blogs.


But now it's time to transition to our next topic, which is multipurpose products. Multipurpose products were one of 2023’s trends, and something we will be exploring more in depth in future blogs.


We thought a shampoo bar was a rather neat combination of the two: shampoo bars are hair related, but let’s face it, they can easily be used as body wash bars as well, making them a multipurpose product!


So let’s dive in.

By now most of you will have heard of, or even tried shampoo bars. They’re solid shampoo in bar form and look like a bar of soap. They’re great for travel, lightweight, and don’t need a lot of packaging - making them a popular choice for the zero waste and waste-less movement.


In terms of making them, shampoo bars are on the more technical side. You need to have a solid  understanding of the hair, as well as some experience with working with surfactants.



Let’s chat a bit about shampoo bar ingredients.


Surfactant-based shampoo bars contain one or more surfactants hardened with fatty acids and butters, and jooshed up with oils and good-for-the-hair actives and conditioning agents. 


Surfactants

Firstly shampoo bars require solid surfactants. You can’t make a bar harden if you have an abundance of liquid ingredients. Sodium cocoyl isethionate is a vegetable based, anionic, solid surfactant that is the main ingredient in most shampoo bars, and it will do nicely.


Secondly, we like to have a blend of a few different surfactants to make the surfactants more mild. The betaines are exceptionally mild and make the rest of the surfactant blend milder. Additionally lauryl betaine has some conditioning and antistatic properties, so we’ll definitely utilise it.


Because our solid surfactant is anionic (as mentioned  here, anionic surfactants are not the first choice for hair products due to their conflicting charge), they are best used in conjunction with a couple of conditioning agents (which are usually cationic). This creates a more gentle shampoo, as otherwise purely anionic surfactant formulations can be a bit drying on the hair.

Note: usually we wouldn’t blend cationics and anionics together in a liquid formulation due to their conflicting charge which may lead to separation issues. But since this is a solid formulation, separation isn’t an issue, so we can get away with it.



Conditioners

You need conditioning agents in a shampoo bar, like with any shampoo. Conditioners can come in the form of nourishing oils, Hydra Hair, hydrolyzed proteins, keratin, panthenol, cationic emulsifiers, or other ingredients such as sodium lactate, or even buttermilk powder.



Thickening/hardening agents

Hard butters, and fatty alcohols and acids such as cetyl alcohol and stearic acid can all work well. Cetearyl alcohol (a combination of cetyl alcohol and stearic acid) has some softening and conditioning properties so try to use it if you can.



Moisturisers

Butters and oils will be our moisturisers. Try to keep your liquid oil amounts low; you don’t want your shampoo bar going soft.

Mafura butter, shea butter and mango butter are great as hair moisturisers.

Argan, amla (macerated), broccoli oil, hemisqualane, castor oil and Hydra hair are some great oil options.



Preservative

Although shampoo bars are typically anhydrous (no water added) we still want to include a preservative because of the nature of a shampoo bar: it might contain a humectant or ingredients that are water soluble, and it sits in your shower and gets wet; we don’t want any funky stuff growing for these reasons. 



Extras

You can play around with optional extras such as essential oils for  fragrance, colourants such as micas, or clays.





ASM

The active surfactant matter of shampoo bars is always going to be way higher than the typical recommended ASM for shampoo, simply because of the nature of solid surfactants and shampoo bars. They are concentrated products. The calculated ASM for the formula below is 47.4, which is much higher than the typical ASM of 15. Therefore we try to make the bar more gentle by including lots of moisturising and conditioning agents.







Conditioning Shampoo Bar

This formula is advanced and requires some technical aspects such as being comfortable with melting surfactants at high temperatures and working quickly.


Phase A

50%  SCI - powder it in a coffee grinder or food processor for ease of use

10%  lauryl betaine

3%  cocamidopropyl betaine

9%  cetyl alcohol

7%  stearic acid

4%  mafura butter


Phase B

5%  buttermilk powder - you could try clay as a substitute

3%  panthenol

5%  oil of choice/  Hydra Hair

Optional: 1% essential oil of choice - reduce oil amount by 1% to accomodate


3%  hydrolyzed proteins collagen keratin

1%  preservative

Lactic acid to reduce the pH if required


Beakers

Silicone spatula

Thermometer

pH strips or pH meter

Protective gear: mask,  goggles and padded gloves

Microwave or double boiler. You need temperatures to get hot so a bain marie isn’t the best choice here.

Mold of choice


Wear your protective gear and please wear a mask when working with SCI powder to avoid inhaling the dust. Weigh out and add Phase A ingredients in a beaker and stir to combine. Now comes the technical part: you will need to heat this mixture in the microwave or a double boiler, and things will get hot. Work in short bursts if using the microwave - just a few seconds at a time, and you will need to watch it like a hawk so that the mixture does not bubble over. Heat for a few seconds, then mix thoroughly. Repeat this process until the mixture is smooth and no lumps remain. It will be very hot so please use padded gloves/oven gloves or a cloth when holding the beaker.


Once Phase A has completely melted and is smooth, remove from the heat and stir in the buttermilk powder until a smooth paste is formed. Next stir in the oil and panthenol one by one. The mixture will be starting to cool now and form a thick paste, so keep stirring to keep it from solidifying. When it has cooled below 40 degrees, add in the hydrolyzed protein and the preservative.


Check the pH: you can’t check pH directly with solid products so you will need to lather the mixture with a small amount of water to make it liquid enough that the pH meter/strips can pick it up. The pH should be around 4.5 - 5.5. If it is higher than 5.5, you can adjust it with a liquid acid such as lactic or glycolic acid. Add the acid drop by drop and stir well in between additions. Tes the pH in between each addition until you reach the correct level.


The mixture should be a cookie dough texture, and you can press it into your mold with the back of a spatula. Pop in the fridge to harden, then unmold and leave for a few days to solidify and dehydrate fully before using. Leaving it to dry out for a few days will result in a harder, longer lasting bar.


Note: if you live in a very humid area, you may need to slightly adjust the formula: reduce the panthenol and add extra hardening agents such as stearic acid/cetearyl alcohol.


To use in the shower: rub the shampoo bar over your wet hair and massage to work up a lather. Rinse well. I always recommend following with a hair conditioner for the healthiest hair.